Update Samsung Galaxy S6 edge SM-G925P Android 7 Nougat

May 8, 2017 | By androidhowto@youtube | Filed in: Firmware.

Update Samsung Galaxy S6 edge SM-G925P Android 7 Nougat. The Android Oreo firmware for Galaxy S6 edge SM-G925P are available for download, for firmware detail you can see it at https://www.sammobile.com/firmwares/SM-G925P/. If you can not download it from the website. You can try download it from alternative webs on updato.com and samsung-firmware.org and no need registered. It also available for some countries.

if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update. Firmware details below is one of the Android 8.0.0 Oreo firmware, you can download it according to your country at the link above.

Model     SM-G925P
Model name     Galaxy S6 edge
Country     Virgin Mobile USA
Version     Android 7
Changelist     10994289
Build date     Fri, 24 Mar 2017 04:31:45 +0000
Security Patch Level     2017-03-01
Product code     VMU
PDA     G925PVPU4DQC7
CSC     G925PSPT4DQC7

Update Android 7 Nougat on Samsung Galaxy S6 edge SM-G925P :

  1. Extract (unzip) the firmware file. Download at https://www.sammobile.com/firmwares/galaxy-s6-edge/SM-G925P/ ( Not Free ) If it does not work try to download it from updato.com or samsung-firmware.org with and no need registered.
  2. Download Odin http://odindownload.com/SamsungOdin/
  3. Extract Odin ZIP file
  4. Open Odin
  5. Reboot Phone in Download Mode ( Turn Power off the phone, Press and hold Volume Down key and Home key, While pressing these keys press and hold Power key, Release all key when Download Mode / Odin Mode appears )
  6. Connect the phone to PC with USB Cable Data, then Press and release Volume Up key
  7. Wait until you get a blue sign in Odin
  8. Add the firmware file to AP / PDA
  9. Make sure re-partition is NOT ticked
  10. Click the start button, sit back and wait few minutes

If you got Boot Loop after update samsung firmware read this How to Fix Boot Loop After Update Samsung Android Firmwares

Warning!

  1. Make sure to backup your data, It will erase all the data.
  2. Make sure the firmware is match with your Samsung Galaxy model number
  3. Make sure to ticked F.Reset Time and Auto-Reboot only
  4. if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update.
  5. If your device rooted, flashing firmware will unroot it.
  6. Do this with your own risk

 

 


Tags: , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *