LG K10 (2017)

February 25, 2017 | By androidhowto@youtube | Filed in: Android.

How to enter LG K10 (2017) Also known as LG X400, LG M250N Recovery Mode, Hard reset / Wipe and Remove forgotten unlock Pattern.

Recovery Mode LG K10 (2017)

  1. Turn off the device
  2. Press and hold Volume down key and Power Key for a few seconds
  3. Release Power key only when LG Logo appears
  4. Keep pressing Volume down key and then press Power Key again until Recovery Mode appears
  5. Done!

Hard reset LG K10 (2017) from Factory Mode

  1. Turn off the device
  2. Press and hold Volume down key and Power Key for a few seconds
  3. Release Power key only when LG logo appears and keep pressing Volume Down key and then press Power key one more
  4. Release all key when Factory mode appears
  5. Use volume key to select Yes
  6. Press Power key to Confirm factory data reset
  7. Done!

Soft reset using Settings Menu

  1. Turn on the device
  2. Select Apps
  3. Select Settings
  4. Select Backup and reset
  5. Select Factory data reset
  6. Select Reset device
  7. Select Erase Everything or Delete All

Warning! If you perform a hard reset, make sure to back up important data. The data can not be recovered after perform a hard reset. If you forgot your unlock pattern, It will remove your forgotten pattern unlock.


Tags: , , , , , , , ,

One comment on “LG K10 (2017)

Leave a Reply

Your email address will not be published. Required fields are marked *