How to Update Samsung Galaxy S7 SM-G930S to Android 8.0.0 Oreo

May 30, 2018 | By androidhowto@youtube | Filed in: Firmware.

Firmware update / Stock ROM : Samsung Galaxy S7 SM-G930S to Android 8.0.0 Oreo. The firmware available for downloading https://www.sammobile.com/firmwares/galaxy-s7/SM-G930S/. You can download your Samsung Galaxy S7 SM-G930S firmware at the page, available for some countries. How to Root for Samsung Galaxy S7 SM-G930S is the separated post, this post only for upgrading to Android 8.0.0 Oreo.

Firmware details below is one of the Android 8.0.0 Oreo firmware, you can download it according to your country at the link above.

Model SM-G930S
Model name Galaxy S7
Country
Version Android 8.0.0
Changelist 13438543
Build date Thu, 10 May 2018 10:55:55 +0000
Security Patch Level 2018-04-01
Product code SKC
PDA G930SKSU1ERE8
CSC G930SSKC1ERE8

How to install Android 8.0.0 Oreo on Samsung Galaxy S7 SM-G930S :

How to Flash Samsung Galaxy Stock ROM (Official/Original Firmware) via ODIN

  1. Extract (unzip) the firmware file. Download at https://www.sammobile.com/firmwares/galaxy-s7/SM-G930S/.  If it does not work try to download it from updato.com with unlimited speed
  2. Download Odin http://odindownload.com/SamsungOdin/
  3. Extract Odin ZIP file
  4. Open Odin
  5. Reboot Phone in Download Mode ( Turn Power off the phone, Press and hold Volume Down key then press and hold Power key, Release all key when Download Mode / Odin Mode appears then Press and release Volume Up key )
  6. Connect the phone to PC with USB Cable Data
  7. Wait until you get a blue sign in Odin
  8. Add the firmware files AP, BL, CP and CSC. If the firmware comes with single file, insert it on the AP only.
  9. In Option make sure to ticked F.Reset Time and Auto-Reboot only
  10. Click the start button, sit back and wait few minutes

If you got Boot Loop after update samsung firmware read this How to Fix Boot Loop After Update Samsung Android Firmwares

Warning!

  1. Make sure to backup your data, It will erase all the data.
  2. Make sure the firmware is match with your Samsung Galaxy model number
  3. Make sure to ticked F.Reset Time and Auto-Reboot only
  4. if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update.
  5. If your device rooted, flashing firmware will unroot it.
  6. Do this with your own risk

 


Tags: , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *