Update Samsung Galaxy J7 Pro SM-J730GM to Android 9 Pie

June 19, 2019 | By androidhowto@youtube | Filed in: Firmware.

How to Flash Android 9 Pie on Samsung Galaxy J7 Pro SM-J730GM. The Android 9 Pie firmware for Galaxy J7 Pro SM-J730GM are available for download, for firmware detail you can see it below. It also available for some countries, you can visit free download for Galaxy J7 Pro SM-J730GM firmware. If you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update. Firmware details below is some of the Android 9 Pie firmware, you can download it according to your country at the link above.

Galaxy J7 Pro SM-J730GM TCE J730GMUBU6CSE6 9 2019-06-07 16068741
Galaxy J7 Pro SM-J730GM CHP J730GMUBU6CSE6 9 2019-05-31 16068741
Galaxy J7 Pro SM-J730GM CHK J730GMUBU6CSE6 9 2019-05-31 16068741
Galaxy J7 Pro SM-J730GM MXO J730GMUBU6CSE6 9 2019-05-31 16068741
Galaxy J7 Pro SM-J730GM PEO J730GMUBU6CSE6 9 2019-05-31 16068741
Galaxy J7 Pro SM-J730GM CHO J730GMUBU6CSE6 9 2019-05-31 16068741

Update Android 8.1.0 Oreo on Samsung Galaxy J7 Pro SM-J730GM

  1. Extract (unzip) the firmware file.
  2. Download Odin http://odindownload.com/SamsungOdin/
  3. Extract Odin ZIP file
  4. Open Odin
  5. Reboot Phone in Download Mode ( Turn Power off the phone, Press and hold Volume Down key + Home key then press and hold Power key, Release all key when Download Mode / Odin Mode appears then Press and release Volume Up key )
  6. Connect the phone to PC with USB Cable Data
  7. Wait until you get a blue sign in Odin
  8. Add the firmware files AP, BL, CP and CSC. If the firmware comes with single file, insert it on the AP only.
  9. In Option make sure to ticked F.Reset Time and Auto-Reboot only
  10. Click the start button, sit back and wait few minutes

If you got Boot Loop after update samsung firmware read this How to Fix Boot Loop After Update Samsung Android Firmwares

Warning!

  1. Make sure to backup your data, It will erase all the data.
  2. Make sure the firmware is match with your Samsung Galaxy model number
  3. Make sure to ticked F.Reset Time and Auto-Reboot only
  4. if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update.
  5. If your device rooted, flashing firmware will unroot it.
  6. Do this with your own risk


Tags: , , , ,

One comment on “Update Samsung Galaxy J7 Pro SM-J730GM to Android 9 Pie

Leave a Reply

Your email address will not be published. Required fields are marked *