Root SM-J730GM Android 9 Pie Samsung Galaxy J7 Pro ( TWRP + Magisk )

June 28, 2019 | By androidhowto@youtube | Filed in: Root.

How to Root Samsung Galaxy J7 Pro SM-J730GM with Android 9 Pie using TWRP and Magisk. Previous Rooting method use Magisk Canary Release without TWRP by patched AP tar file. Read notes / Warning on the bottom of this post before perform root your Samsung Galaxy J7 Pro SM-J730GM. Take it your own risk! Follow the instruction carefully and read the warning! Make sure to backup all your important data! Rooting J7 Pro SM-J730G, SM-J730GM and SM-J730F Android 9 Pie using TWRP and Magisk.

Step by step Rooting Samsung Galaxy J7 Pro SM-J730GM Android 9 Pie with TWRP

Flashing TWRP and Rooting Galaxy J7 Pro SM-J730GM Android 9 Pie :

  1. Make sure your phone isn’t RMM Locked. If RMM Locked or you can not see OEM unlock options in Developer options. Read How to Fix RMM state and OEM unlock option without wait 7 days / 168 hours.
  2. Open ODIN software
  3. In Option make sure to ticked F.Reset Time only and disable Auto-Reboot.
  4. In Files Download ticked AP and pointing to the location of TWRP .tar file
  5. Turn off your Samsung Galaxy and open Download Mode or ODIN Mode: To enter Download Mode Press and hold Volume Down key + Home Key, while pressing these keys Press and hold Power key, Release all key when Download / Odin mode appears.
  6. Connect your Samsung Galaxy to PC using USB Cable and Press Volume Up key.
  7. Odin software will auto detect port of your device, after detected device, klik Start, wait for a moment.
  8. To get out of Download mode and Enter TWRP Recovery mode: Press and hold Volume Down + Home key while pressing these keys press and hold Power key and immediately press Volume Up key when the screen blanks while keep pressing Home key and Power key. Release all keys when TWRP Recovery appears.
  9. Once TWRP is booted, decrypt data partition touch Wipe>Format Data and follow the instructions in screen.
  10. WARNING!!! Don’t reboot to system after flashing TWRP, and that’s wrong since once you reboot to system after flashing TWRP and without flashing the RMM Bypass zip will immediately trigger RMM Prenormal lock.
  11. Once it finished go back at the home screen and touch Reboot>Recovery.
  12. Select Install – Select Storage – Micro SD Card, First install RMM-State_Bypass_Mesa_v2, then no-verity-opt-encrypt-6.0 and last Magisk ( you need to install Magisk to prevent bootloop, the device will not root until Magisk Manager App are installed )
  13. Reboot to System, it need more time.. just be patient!
  14. Setup the phone and Install Magisk Manager App for Rooting.

If you get error message Security notice:Unauthorized actions have been detected. Restart your device to undo any unauthorized changesJust freeze SecurityLogAgent to fix it.

If something goes wrong and you want to unroot it, just flash the ROM to make it works again. Read How to flash Galaxy J7 Pro SM-J730GM.

Notes / Warning!

  1. Use at your own risk, I’m not responsible for bricking your device.
  2. Using the incorrect file may brick your device.
  3. If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
  4. If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
  5. If your device storage is encrypted, Rooting will wipe your data !
  6. If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
  7. Make sure to backup your important data before root it.


Tags: , , , , , ,

4 comments on “Root SM-J730GM Android 9 Pie Samsung Galaxy J7 Pro ( TWRP + Magisk )

Leave a Reply

Your email address will not be published. Required fields are marked *