TWRP Root Samsung Galaxy M30s SM-M307F Android 10 – BTC6 Firmware

April 1, 2020 | By androidhowto@youtube | Filed in: Root.

How to Root Samsung Galaxy M30s SM-M307F Android 10 Q – BTC6 Firmware using TWRP + Patched Magisk. This TWRP ( TWRP_BTC6_MagiskPatched.tar )  is only for Android 10 Q BTC6 Firmware and included magisk patched. Read notes / Warning on the bottom of this post before perform root your Samsung Galaxy M30s. Take it at your own risk! Follow the instruction carefully and Make sure to backup all your important data!  Visit this link for rooting M30s Android 9 Pie.

Step by step Rooting Samsung Galaxy M30s SM-M307F Android 10 Q – BTC6 Firmware

Rooting Galaxy M30s SM-M307F Android 10 Q with TWRP and Magisk patched:

    1. Make sure the bootloader are unlocked, OEM unlock option is grey
    2. Enter Download Mode : Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Reboot to bootloader.
    3. Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
    4. Flashing TWRP_BTC6_MagiskPatched.tar as AP in ODIN,
    5. Connect to the phone to computer then click start.
    6. Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
    7. DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
    8. Select Wipe -> Format data.
    9. Copy Disable_Dm-Verity_ForceEncrypt_01.14.2020.zip to phone
    10. Install Disable_Dm-Verity_ForceEncrypt_01.14.2020.zip
    11. Select Reboot to Recovery
    12. Setup the phone
    13. Connect the phone to Internet wait for a moment, make sure OEM unlock option is grey
    14. Install Magisk Manager. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
    15. Done! You can use Root Checker to check it, Enjoy!

If something goes wrong and you want to unroot it, just flash the ROM to make it works again. Read How to flash Galaxy M30s.

Notes / Warning!

  1. Use at your own risk, I’m not responsible for bricking your device.
  2. Using the incorrect file may brick your device.
  3. If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
  4. If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
  5. If your device storage is encrypted, Rooting will wipe your data !
  6. If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
  7. Make sure to backup your important data before root it.

Watch this video :

TWRP Root Samsung Galaxy M30s SM-M307F Android 10 - BTC6 Firmware


Tags: , , , ,

4 comments on “TWRP Root Samsung Galaxy M30s SM-M307F Android 10 – BTC6 Firmware

  1. Whean i flash twrp using odin it shows only official binaries are allowed (vmade) how to solve this problam please tell me

Leave a Reply

Your email address will not be published. Required fields are marked *