Update Samsung Galaxy A6 SM-A600FN to Android 9 Pie

April 19, 2019 | By androidhowto@youtube | Filed in: Firmware.

Update Samsung Galaxy A6 SM-A600FN to Android 9 Pie. The Android 9 Pie firmware for Samsung Galaxy A6 SM-A600FN are available for download, For free download you can visit Free Download Android 9 Pie ROM Samsung Galaxy A6 SM-A600FN. It also available for some countries.

if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update. Firmware details below is one of the Android 9 Pie firmware, you can download it according to your country at the link above.

Galaxy A6 SM-A600P Pie(Android 9) April 14, 19 USA (Sprint) (SPR) A600PVPU2BSC8
Galaxy A6 SM-A600P Pie(Android 9) April 14, 19 USA (Sprint) (VMU) A600PVPU2BSC8
Galaxy A6 SM-A600P Pie(Android 9) April 14, 19 Australia (Boost Mobile) (BST) A600PVPU2BSC8

How to Update Android 9 Pie on Samsung Galaxy A6 SM-A600FN :

  1. Extract (unzip) the firmware file.
  2. Download Odin http://odindownload.com/SamsungOdin/
  3. Extract Odin ZIP file
  4. Open Odin
  5. Android 8.0 Oreo: Download Mode  ( Connected USB Cable to PC, Turn Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears. Press Volume Up to continue )
  6. Android 9 Pie: Download Mode ( Turn Power off the phone, Press and hold Volume Up key +  Power key, Release all key when Samsung Logo appears, select Reboot to Bootloader, Connect the phone to PC with USB Cable Data )
  7. Wait until you get a blue sign in Odin
  8. Add the firmware files AP, BL, CP and CSC.
  9. In Option make sure to ticked F.Reset Time and Auto-Reboot only
  10. Click the start button, sit back and wait few minutes

If you got Boot Loop after update samsung firmware read this How to Fix Boot Loop After Update Samsung Android Firmwares

Warning!

  1. Make sure to backup your data, It will erase all the data.
  2. Make sure the firmware is match with your Samsung Galaxy model number
  3. Make sure to ticked F.Reset Time and Auto-Reboot only
  4. if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update.
  5. If your device rooted, flashing firmware will unroot it.
  6. Do this with your own risk


Tags: , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *