Update Samsung Galaxy J4 SM-J400M to Android 9 Pie

Update Samsung Galaxy J4 SM-J400M to Android 9 Pie. The Android 9 Pie firmware for Galaxy J4 SM-J400M are available for download, for firmware detail you can see it below. It also available for some countries, you can visit free download for Galaxy J4 SM-J400M firmware. If you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update. Firmware details below is one of the Android 9 Pie firmware, you can download it according to your country at the link above.

Galaxy J4 SM-J400M Pie(Android 9) April 27, 19 Peru (PEO) J400MUBU3BSDD
Galaxy J4 SM-J400M Pie(Android 9) April 27, 19 Mexico (MXO) J400MUBU3BSDD
Galaxy J4 SM-J400M Pie(Android 9) April 27, 19 Paraguay (UPO) J400MUBU3BSDD
Galaxy J4 SM-J400M Pie(Android 9) April 27, 19 Bolivia (BVO) J400MUBU3BSDD
Galaxy J4 SM-J400M Pie(Android 9) April 27, 19 Panama (TPA) J400MUBU3BSDD
Galaxy J4 SM-J400M Pie(Android 9) April 27, 19 Argentina (ARO) J400MUBU3BSDD

How to install Android 9 Pie on Samsung Galaxy J4 SM-J400M 2018 :

  1. Extract (unzip) the firmware file.
  2. Download Odin http://odindownload.com/SamsungOdin/
  3. Extract Odin ZIP file
  4. Open Odin
  5. Connected USB Cable to PC
  6. Reboot Phone in Download Mode ( Turn Power off the phone, Press and hold Volume Down + Home key together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears. Press Volume Up to continue )
  7. Wait until you get a blue sign in Odin
  8. Add the firmware files AP, BL, CP and CSC. If the firmware comes with single file, insert it on the AP only.
  9. In Option make sure to ticked F.Reset Time and Auto-Reboot only
  10. Click the start button, sit back and wait few minutes

If you got Boot Loop after update samsung firmware read this How to Fix Boot Loop After Update Samsung Android Firmwares

Warning!

  1. Make sure to backup your data, It will erase all the data.
  2. Make sure the firmware is match with your Samsung Galaxy model number
  3. Make sure to ticked F.Reset Time and Auto-Reboot only
  4. if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update.
  5. If your device rooted, flashing firmware will unroot it.
  6. Do this with your own risk

 

Leave a Reply

Your email address will not be published. Required fields are marked *