Update Samsung Galaxy J7 Pro SM-J730G to Android 7 Nougat

July 28, 2017 | By Kireina | Filed in: Firmware.

Firmware update / Stock ROM : Samsung Galaxy J7 Pro SM-J730G Android 7 Nougat. The firmware available for downloading https://www.sammobile.com/firmwares/SM-J730G/. You can download your Samsung Galaxy J7 Pro SM-J730G firmware at the page, available for some countries. How to Root for Samsung Galaxy J7 Pro SM-J730G is the separated post, this post only for upgrading to Android 7 Nougat. Update: Android 8.1.0 Oreo has Availabled for Samsung Galaxy J7 Pro SM-J730G.

Firmware details below is one of the Android 7 Nougat firmware, you can download it according to your country at the link above.

Model SM-J730G
Model name Galaxy J7 Pro
Country Australia
Version Android 7.0
Changelist 11460356
Build date Fri, 01 Sep 2017 06:32:50 +0000
Security Patch Level 2017-08-01
Product code XSA
PDA J730GDXU1AQI1
CSC J730GXSA1AQI1

How to Update Android 7 Nougat on Samsung Galaxy J7 Pro SM-J730G :

  1. Extract (unzip) the firmware file. Download at https://www.sammobile.com/firmwares/SM-J730G/
  2. Download Odin http://odindownload.com/SamsungOdin/
  3. Extract Odin ZIP file
  4. Open Odin
  5. Reboot Phone in Download Mode ( Turn Power off the phone, Press and hold Volume Down key and Home key, While pressing these keys press and hold Power key, Release all key when Download Mode / Odin Mode appears )
  6. Connect the phone to PC with USB Cable Data, then Press and release Volume Up key
  7. Wait until you get a blue sign in Odin
  8. Add the firmware file to AP / PDA
  9. Make sure re-partition is NOT ticked
  10. Click the start button, sit back and wait few minutes

Android 8.1.0 Available for Samsung Galaxy J7 Pro SM-J730G

Free download link Android 8.1.0 Oreo firmware for Galaxy J7 Pro SM-J730G available for available for Vietnam, Indonesia, Philippines, Cambodia, Thailand.

If you got Boot Loop after update samsung firmware read this How to Fix Boot Loop After Update Samsung Android Firmwares

Warning!

  1. Make sure to backup your data, It will erase all the data.
  2. Make sure the firmware is match with your Samsung Galaxy model number
  3. Make sure to ticked F.Reset Time and Auto-Reboot only
  4. if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update.
  5. If your device rooted, flashing firmware will unroot it.
  6. Do this with your own risk

 

 



Tags: , , ,

Leave a Reply