Flashing ROM Samsung Galaxy S10 5G SM-G977B Android 9 Pie

July 18, 2019 | By androidhowto@youtube | Filed in: Firmware.

Flashing ROM Android 9 Pie Samsung Galaxy S10 5G SM-G977B. The Android 9 Pie firmware for Galaxy S10 5G SM-G977B are available for download, for firmware detail you can see it below. It also available for some countries, you can visit Free download Android 9 Pie for Galaxy S10 5G SM-G977B firmware and look for Android OS version.

if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update. Firmware details below is one of the Android 9 Pie firmware, you can download it according to your country at the link above.

Galaxy S10-5g SM-G977B AUT G977BXXU1ASF5 9 2019-06-28 16199722
Galaxy S10-5g SM-G977B OMN G977BXXU1ASF5 9 2019-07-04 16199722
Galaxy S10-5g SM-G977B DTM G977BXXU1ASFC 9 2019-06-24 16199722
Galaxy S10-5g SM-G977B ATL G977BXXU1ASF5 9 2019-06-28 16199722
Galaxy S10-5g SM-G977B VOD G977BXXU1ASF5 9 2019-06-28 16199722

How to update Android 9 Pie on Samsung Galaxy S10 5G SM-G977B :

  1. Extract (unzip) the firmware file.
  2. Download Odin http://odindownload.com/SamsungOdin/
  3. Extract Odin ZIP file
  4. Open Odin
  5. Reboot Phone in Download Mode ( Turn Power off the phone, Press and hold Volume Up key + Bixby key + Power key, Release all keys when Android Recovery appears then select Reboot to bootloader, press power key to confirm )
  6. Connect the phone to PC with USB Cable Data
  7. Wait until you get a blue sign in Odin
  8. Add the firmware files AP, BL, CP and CSC. If the firmware comes with single file, insert it on the AP only.
  9. In Option make sure to ticked F.Reset Time and Auto-Reboot only
  10. Click the start button, sit back and wait few minutes

If you got Boot Loop after update samsung firmware just perform a hard reset.

Warning!

  1. Make sure to backup your data, It will erase all the data.
  2. Make sure the firmware is match with your Samsung Galaxy model number
  3. Make sure to ticked F.Reset Time and Auto-Reboot only
  4. if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update.
  5. If your device rooted, flashing firmware will unroot it.
  6. Do this with your own risk


Tags: , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *