How to Install Sky Hawk Recovery Project 3.1 ( SHRP ) for Samsung Galaxy A50

November 7, 2021 | By androidhowto@youtube | Filed in: Custom Recovery.

How to install Sky Hawk Recovery Project 3.1 on Samsung Galaxy A50 developed by TenSeventy7@xdaforum.  SHRP is inspired by Material design 2 to bring the newest design to the native TWRP. SHRP provides much more along side of it’s rich UI experience. New dashboard makes it very easy to interact with TWRP. SHRP got some cool features like Whole new theming section , Flash Magisk (root or unroot), Camera2api enabler Directly from dashboard, Password protection etc. It’s all started , lot more to come.

Install TWRP Recovery – Ignore this if its installed

  1. Make sure the bootloader are unlocked, OEM unlock option is grey out
  2. Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
  3. Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
  4. Flashing TWRP_v3.5.2_A505_A11_Magisk.tar as AP in ODIN, then click start.
  5. DO NOT SKIP THIS STEP! Don’t remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Appears.
  6. Select Wipe -> Format data, type ‘yes’ and confirm
  7. Copy multidisabler_samsung.zip to phone, ignore this if you copied to SD Card
  8. Select Install – select multidisabler_samsung.zip Swipe to confirm Flash
  9. Select Reboot to System
  10. Setup the phone
  11. Done

Install Sky Hawk Recovery Project 3.1 ( SHRP )

  1. Enter TWRP Recovery Mode: Turn power off, Connect the phone with a USB cable, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Appears.
  2. Select Install – select SHRP_v3.1_stable-Unofficial_a50-magisk.zip or SHRP_v3.1_stable-Unofficial_a50-1636258573.zip, Swipe to confirm Flash
  3. Select Reboot to System
  4. Done

How to root with SHRP ( Make sure SHRP magisk patched installed )

  1. Enter SHRP Recovery Mode: Turn power off, Connect the phone with a USB cable, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until SHRP Recovery Appears.
  2. Select Reboot to recovery
  3. Done

Download SHRP

Watch This Video!

Sky Hawk Recovery Project 3.1 ( SHRP ) for Samsung Galaxy A50
Watch this video on YouTube.

Notes / Warning!

  1. Use at your own risk, I’m not responsible for bricking your device.
  2. Using the incorrect file may brick your device.
  3. If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
  4. If you have a KNOX-enabled device, flash custom rom and Rooting will trip the KNOX WARRANTY VOID status!
  5. If your device storage is encrypted, Rooting will wipe your data !
  6. If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
  7. Make sure to backup your important data before root it.

 


Tags: , , , , ,

Leave a Reply

Your email address will not be published.