How to Flash TWRP and Root Samsung Galaxy A50 SM-A505F CUH3-S9 BIT (BINARY/U/SW REV) 9

How to flash TWRP and Root Samsung Galaxy A50 SM-A505F CUH3-S9 BIT (BINARY/U/SW REV) 9 Android 11. The TWRP Recovery support Galaxy A50 One UI 3.1 Android 11 firmware, Android security patch level: 1 August 2021. It may be works for SM-A505F, SM-A505FN, SM-A505G, SM-A505GN. The TWRP 3.5.2 comes with Magisk v23.0 Patched. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!

Root Samsung Galaxy A50: Downloads

• Enable Developer Options: go to Settings -> About device -> Software information. Tap 7 times on Build number to enable Developer options.
• Enable OEM unlock and USB debugging options ( Settings -> Developer options )
• Make sure the bootloader are unlocked, If not read How to unlock Bootloader
• Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
• Download and Install Samsung Mobile Phone Drivers
• Download TWRP_v3.5.2_A505_A11_Magisk.tar
• Download multidisabler_samsung.zip

Root Samsung Galaxy A50: Flashing TWRP v3.5.2

1. 1. Make sure the bootloader are unlocked, OEM unlock option is grey out
      
   2. Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
   3. Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
   4. Flashing TWRP_v3.5.2_A505_A11_Magisk.tar as AP in ODIN, then click start.
   5. DO NOT SKIP THIS STEP! Don’t remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Appears.
   6. Select Wipe -> Format data, type ‘yes’ and confirm
   7. Copy multidisabler_samsung.zip to phone, ignore this if you copied to SD Card
   8. Select Install – select multidisabler_samsung.zip Swipe to confirm Flash
   9. Select Reboot to Recovery ( for rooting ) or Reboot to System
      
   10. Setup the phone
   11. Connect Phone to Internet
   12. Install Magisk app and Open it. Magisk will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
   13. Done

Read How to Fix Magisk SafetyNet CTS Profile Failed on Samsung Galaxy A50 – September 2021 Security Update

Watch This Video!

If something goes wrong and you want to unroot it, just flash the ROM to make it works again. Read How to flash Galaxy A50.

Notes / Warning!

1. Use at your own risk, I’m not responsible for bricking your device.
2. Using the incorrect file may brick your device.
3. If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
4. If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
5. If your device storage is encrypted, Rooting will wipe your data !
6. If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
7. Make sure to backup your important data before root it.

Tags: Android 11 root, Custom Recovery for A50, Galaxy A50 SM-A505F, Magisk Root, Root Galaxy A50, Root One UI 3.1, Root SM-A505F CUH3, Samsung Galaxy A50, TWRP 3.5.2 for A50

One comment on “How to Flash TWRP and Root Samsung Galaxy A50 SM-A505F CUH3-S9 BIT (BINARY/U/SW REV) 9”

1. One ui12

   Reply