Root SM-A600F Android 9 Pie Samsung Galaxy A6 2018

How to root Samsung Galaxy A6 2018 SM-A600F Android 9 Pie using ODIN software. Root files Included TWRP recovery for Galaxy A6 2018 SM-A600F, ODIN v3.13.1, Stable Magisk Version: v18.1, Magisk Manager Version: v7.1.1, latest no-verity-opt-encrypt and RMM-State_Bypass_Mesa_v2. Read notes / Warning on the bottom of this post before perform root your Samsung Galaxy A6 2018. Take it your own risk! Follow the instruction carefully and read the warning! Make sure to backup all your important data!

Step by step Rooting Samsung Galaxy A6 2018 Android 9 Pie :

Tools that must be prepared:

Install TWRP and Root file on Galaxy A6 2018 Android 9 Pie

  1. Make sure your phone isn’t RMM Locked. If RMM Locked or you can not see OEM unlock options in Developer options. Read How to Fix RMM state and OEM unlock option without wait 7 days / 168 hours.
  2. Open ODIN software
  3. In Option make sure to ticked F.Reset Time only and disable Auto-Reboot.
  4. In Files Download ticked AP and pointing to the location of TWRP .tar file
  5. Enter Download Mode ( Connected USB Cable to PC, Turn Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears. Press Volume Up to continue )
  6. Odin software will auto detect port of your device, after detected device, klik Start, wait for a moment.
  7. Once Odin3 finished to flash the recovery (you should see a “PASS” message), force reboot your phone ( Press and hold Volume Down and Power keys together ) and when the screen is off, press and hold Volume Up and Power keys together to boot TWRP Recovery mode.
  8. Once TWRP is booted, decrypt data partition touch Wipe>Format Data and follow the instructions in screen.
  9. WARNING!!! Don’t reboot to system after flashing TWRP, and that’s wrong since once you reboot to system after flashing TWRP and without flashing the RMM Bypass zip will immediately trigger RMM Prenormal lock.
  10. Go back to home screen then Reboot -> Recovery.
  11. Copy files RMM-State_Bypass_Mesa_v2, no-verity-opt-encrypt-6.0, Magisk-v18.1 to the phone from computer.
  12. Install RMM-State_Bypass_Mesa_v2 first and then no-verity-opt-encrypt-6.0 and Magisk-v18.1 ( you must install Magisk-v18.1 file to prevent boot loop, it does not make the phone rooted ). Follow the next step for rooting it.
  13. Reboot to system
  14. For rooting: copy Magisk-v18.1 and MagiskManager-v7.1.1.apk to phone from PC.
  15. Install MagiskManager-v7.1.1.apk ( If you open MagiskManager you will see there is no Magisk installed )
  16. Reboot to TWRP Recovery.
  17. Install Magisk-v18.1 once again
  18. Reboot to system
  19. Open MagiskManager, now you will see magisk have installed, it means the phone have rooted. Use root checker to check it.

If for any reason you fail to install TWRP multiple times/different methods, make sure you check this thread and if something goes wrong and you want to flash the ROM visit this post How to flash ROM on Galaxy A6 2018.

Notes / Warning!

  1. Use at your own risk, I’m not responsible for bricking your device.
  2. Using the incorrect file may brick your device.
  3. If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
  4. If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
  5. If your device storage is encrypted, Rooting will wipe your data !
  6. If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
  7. Make sure to backup your important data before root it.

Leave a Reply

Your email address will not be published. Required fields are marked *