TWRP 3.4.0.0 for Rooting Galaxy A50 Android 10 Q

July 25, 2020 | By androidhowto@youtube | Filed in: Root.

How to root ( TWRP 3.4.0.0 ) Samsung Galaxy A50 Android 10 Q – BTE1 firmware ( Android Security Patch Level 2020-05-01 ). It may be works for other variants SM-A505F, SM-A505FN, SM-A505GN, SM-A505G, SM-A505GT, SM-A505FM, SM-A505YN. This Root method use latest TWRP 3.4.0.0 and Magisk patched. Read notes / Warning on the bottom of this post before perform root your Samsung Galaxy A50. Use it your own risk! Follow the instruction carefully and Make sure to backup all your important data!

Downloads

Rooting Galaxy A50 Android 10 Q BTE1 firmware:

    1. Make sure the bootloader are unlocked, OEM unlock option is grey out
    2. Enter Download Mode : Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Wipe data/factory reset and confirm then Select Reboot to bootloader.
    3. Connect to the phone to computer
    4. Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
    5. Flashing A50_TWRP_3.4.0.0_Magisk_Patched.tar as AP in ODIN, then click start.
    6. Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
    7. DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
    8. Select Wipe -> Format data, type ‘yes’ and confirm
    9. Copy multidisabler-samsung-2.2.zip to phone
    10. Install multidisabler-samsung-2.2.zip
    11. Select Reboot to System
    12. When Samsung logo wait for a few seconds then press and hold volume down + power key until the screen blank
    13. Setup the phone
    14. Enter TWRP Recovery: Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until TWRP Recovery Appears.
    15. Select Reboot to Recovery
    16. Connect the phone to Internet wait for a moment, make sure OEM unlock option is grey
    17. Install Magisk Manager. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
    18. Done! You can use Root Checker to check it, Enjoy!

If something goes wrong and you want to unroot it, just flash the ROM to make it works again. Read How to flash Galaxy A50.

Notes / Warning!

  1. Use at your own risk, I’m not responsible for bricking your device.
  2. Using the incorrect file may brick your device.
  3. If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
  4. If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
  5. If your device storage is encrypted, Rooting will wipe your data !
  6. If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
  7. Make sure to backup your important data before root it.

Watch this video:

TWRP 3.4.0.0 for Rooting Galaxy A50 Android 10 Q


Tags: , , , , ,

One comment on “TWRP 3.4.0.0 for Rooting Galaxy A50 Android 10 Q

  1. prashant kumar says:

    bro driver is not downloding

Leave a Reply

Your email address will not be published. Required fields are marked *